Ubiquiti Networks

From Antcor

Download and install Ikarus OS

---

Using Windows

1. Visit http://web.antcor.com/downloads.asp.
2. Click on Ubiquiti Networks and then right click on LiteStation2_v_latest.img first time install.
3. Right click "Save link as..." and save it on your hard disk.
4. Connect the board via Ethernet to your PC.
5. Connect the supply cable on the board.
6. Make sure that they are on same subnet.
   • − Click Start→ Settings→ Network Connections→ Local Area Connection.
   • − Click on Properties.
   • − Click on Internet Protocol (TCP/IP).
   • − Change the IP Address to 192.168.1.x.
   • − So now you are connected.
7. Open a browser and click on URL field the IP of the board.
   • − default 192.168.1.20
8. Click on Login and you will see the Firmware which is already installed.
9. Click on Firmware Update.
10. Find the file you have download Litestation2_v_latest.img.
11. Follow the instructions and at the end click reboot.
12. After the reboot the new IP Address of the board will be 192.168.1.3.
13. Now you are ready to setup the board with Ikarus OS Manager.

Using Linux

1. Visit http://web.antcor.com/downloads.asp.
2. Click on Ubiquiti Networks and then right click on Litestation2_v_latest.img first time install.
3. Click "Save link as..." and save it on your hard disk.
4. Connect the wrap board via Ethernet to your PC.
5. Connect the supply cable on the board.
6. Make sure that they are on same subnet.
   • − Press the command ifconfig to see your IP.
   • − In order to be in the same subnet press the command:
   • − ifconfig eth0 192.168.1.x.
   • − So now you are connected.
7. Open a browser and click on URL field the IP of the board.
   • − default 192.168.1.20
8. Click on Login and you will see the Firmware which is already installed.
9. Click on Firmware Update.
10. Find the file you have download Litestation2_v_latest.img.
11. Follow the instructions and at the end click reboot.
12. After the reboot the new IP Address of the board will be 192.168.1.3.
13. Now you are ready to setup the board with Ikarus OS Manager.